What kind of inspection should be done after the mixer is used for a period of time
What kind of inspection should be done after the mixer is used for a period of time
1: including the monthly inspection requirements of the mixer
2: check the mixer cooling system and temperature control system for fouling.
3: check the internal mixer gear tooth wear.
4: Check whether the radial clearance and axial movement of each bearing of the mixer are within the specified range.
5: Check whether the gaps between the protruding edge of the mixer rotor and the front wall of the mixing chamber, between the end face of the rotor and the side wall of the mixing chamber, between the pressure weight and the charging port, and between the two zhangzi protruding edges are within the allowable range.
6: check the mixer noise.
What kind of inspection should be done after the mixer is used for a period of time
1: including the monthly inspection requirements of the mixer
2: check the mixer cooling system and temperature control system for fouling.
3: check the internal mixer gear tooth wear.
4: Check whether the radial clearance and axial movement of each bearing of the mixer are within the specified range.
5: Check whether the gaps between the protruding edge of the mixer rotor and the front wall of the mixing chamber, between the end face of the rotor and the side wall of the mixing chamber, between the pressure weight and the charging port, and between the two zhangzi protruding edges are within the allowable range.
6: check the mixer noise.