Equipment technical parameters and configuration

1.XK-450 Main specifications:

1.1Model:Xk-φ450 X1200

1.2Type: Integral Splice

1.3One-time feeding quantity: 　 50~60

1.4Main motor: 55-6Class energy-saving AC motor

1.5 Roller speed ratio: (front: rear)         1:1.29

1.6Roller line speed:(Design value)                      Before:28.6 m/min

Detailed specifications:

2.1Roller set:

2.1.1Type: FrontRoller is peripheral drilling typeThe rear roller is of hollow type.Each1Support

2.1.2Material: alloy chilled cast iron (LTG-H), precision grinding after tempering treatment.

2.1.3Working surface hardness:HS:70±2

2.1.4A strong spring is installed between the bearing seats on both sides of the roller to follow the electric pitch adjustment to effectively avoid the gap between the pitch screw and the roller and prevent collision.Group 2

2.1.5 bearings using double row spherical roller bearings.(Origin: Wafangdian)　    4Group

2.1. 6 The bearing housing is made of cast iron (FC30), processed after tempering treatment. And attached lubricating oil hole.                4Group

2.1.7 The bearing seat cover is made of iron and attached with labyrinth ring oil seal, and there is no oil leakage on the inner and outer sides.  4Group

2.1.8 Rotary joint for roller heating and cooling with stainless steel metal hose.  2Group

2.1.9 Pneumatic cutter: stable, safe and convenient.1

2.2Base and rack

2.2.1Base is adoptedHThe section steel is welded, tempered and machined. 1One

2.2.2Rack AdoptionHSteel welding, after tempering processing,Group 2

2.2.3 Stainless Steel Material Basin1One

2.3Roller gap adjustment device

2.3.1Adjustment range:0.4～15mm

2.3.2Hydraulic pump, cylinder composition.

2.3.3Adjustable pitch mode:HydraulicAdjustable pitch

2.3.4 Electrical control: it can realize linkage, single action and inching, so that the roller distance at both ends of the roller can reach the same when adjusting.

2.3.5 Pitch specification:Each side is adoptedCylinder pitch adjustment, stable, safe and difficult to fail.The distance display adopts a digital display distance meter, which is installed on the power distribution cabinet to effectively check the distance between sticks andThe limit switch is installed at the limit position of the adjustable distance to ensure that the roller distance is always within the specified range during the adjustable distance.range, to prevent the occurrence"Touch the stick" phenomenon.   

2.4Rubber baffle group: hydraulic rubber baffle

2.4.1Distance adjustment mode: hydraulic distance adjustment, electric control can realize linkage and single action.

2.4.2 Range of pitch adjustment:150~1500mm

2.4.3 The hydraulic pump, motor, oil cylinder, fixed guide rod,MCNylon baffle composition

2.4.4 The transmission base and nylon plate seat adopt high qualitySS41Welding

2.4.5 Add auxiliary rubber plate to rubber plate twice to effectively prevent rubber material from entering between roller bearing seats.

2.5 Transmission mechanism:

2.5.1Main motor:6-level energy-saving AC motor, speed740rpm                  1Taiwan

2.5.2Reduction gearbox:SK (XK）450, single input force, double output, closed oil immersion type hard tooth surface reducer. Noise ≤78dB,Safety factor:SA≥2times more.       

2.5.3Reducer gearbox and motor coupling: elastic sleeve pin coupling.     1Group

2.5.4Reduction gear box and roller coupling: double out-shaft universal joint coupling.