Equipment parameters:

400 Refined:（16Inch mill)

1.Main Specifications

1.1Model: XK-φ400×1000mm

1.2Type: Integral Splice

1.3One-time feeding quantity: 35～55kg

1.4Main motor:  45KW-6-level energy-saving AC motor

1.5Roller speed ratio: (front: rear)              1:1.27

1.6Roller line speed:(Design value)               Before:19.3m/min

Detailed specifications:

2.1Roller set:

2.1.1Type: front and rear rollers are hollow.Each1Support

2.1.2Material: alloy chilled cast iron (LTG-H), precision grinding after tempering treatment.

2.1.3Working surface hardness:HS:70±2

2.1.4 A strong spring is installed between the bearing seats on both sides of the roller to follow the pitch adjustment to effectively avoid the gap between the pitch adjustment screw and the roller and prevent collision.2Group

2.1.5 bearings using double row spherical roller bearings.(Origin: Wafangdian)　    4Group

2.1.6 The bearing seat is made of cast iron (FC30), processed after tempering treatment. And attached lubricating oil hole.                4Group

2.1.7 The bearing seat cover is made of iron and attached with labyrinth ring oil seal, and there is no oil leakage on the inner and outer sides.  4Group

2.1.8 Rotary joint for roller heating and cooling with stainless steel metal hose.  2Group

2.2Base and rack

2.2.1Base is adoptedHThe section steel is welded, tempered and machined. 1One

2.2.2Steel framePlateWelded, processed by tempering,Group 2

2.2.3 Stainless Steel Material Basin1One

2.3Roller gap adjustment device

2.3.1  Adjustment range:0.8～10mm

2.3.2   Adjustable pitch mode:Hands.Dynamic pitch adjustment

2.3.3Electrical control: linkage, single action and inching can be realized, so that the roller distance at both ends of the roller can be adjusted to be consistent.

2.4Rubber baffle group: hydraulic rubber baffle

2.4.1 pitch adjustment mode: hydraulic pitch adjustment, electrical control can realize linkage and single action.

2.4.2 Range of pitch adjustment:200-800mm

2.4.3 The hydraulic pump, motor, oil cylinder, fixed guide rod,MCNylon baffle composition

2.4.4 The transmission base and nylon plate seat adopt high qualitySS41Welding2.4.5The rubber baffle is equipped with auxiliary rubber baffle twice to effectively prevent the rubber material from entering the roller bearing seat.

2.5 Transmission mechanism:

2.5.1Main motor:6Level energy-saving AC motor, speed970rpm。　　　　        1Taiwan

2.5.2Reduction gearbox:ZSY315-45, single input force, single output, closed oil immersion type hard tooth surface reducer. Noise≤78dB,Safety factor:SA≥2times more.                      1Taiwan

2.5.3Reducer gearbox and motor coupling: elastic sleeve pin coupling.     1Group

2.5.4Reduction gear box and roller coupling: pin coupling.          1Group

2.6 Emergency braking device:

2.6.1Type: electric hydraulic block brake. Add protective cover

2.6.2Braking ability: roller sliding after braking≤1/4The perimeter.

2.6.3:: Emergency stop button installation position: installed above both ends of the machine pressure plate    

  : Kick emergency stop device, installed in the base operating position.