110-litre turnover internal mixer
Classification:
Keyword: 110-litre turnover internal mixer
Product Description
Technical parameters and configuration of 110 liter mixer
internal mixer:
1.Mechanical features:
2.1 base: useBThe type channel steel and the steel plate are welded and processed.
2.2 chamber:Use28CrMnMo steel castings after heat treatment modulation, and the material contact surface welding wear-resistant hard German Stellite hardness.HRC60-62.. Machined dovetail groove, embedded wear strip, good sealing.
Externally mounted cast iron heaters for warming the chamber.
2.3 mixing shaft:Subject AdoptionCrMo alloy steel forging is tempered by heat treatment. Adopt screw edgeCrMoAlloy steel wax mold casting, with Stelli welding rod welding, after the overall heat treatment quenching and tempering., And in the whole surface welding wear-resistant alloy. The stirring edge meter is reasonable, the shape is round, and the stirring effect is more superior. Cooling water can be passed inside, making better cooling.
2.4 column: adoptedA3The steel plate is bent and welded with the steel pipe. It has strong stability and stability.2.5 leak proof device:The end face of the mixing shaft adopts a mechanical shaft seal tightening system., plus spacer sleeve,Two sets of seals,Double layer leak proof.On the side of the press cover, there are plate-type tightening. Polymer resin fiber material wear-resistant, not easy to break. The replacement is convenient and quick, and does not affect the production schedule.
3. Pressurized system
3.1Pneumatic cylinder: special cylinder. Speed and pressure can be adjusted according to customer convenience.
3.2 gland: main body adopts45# Cast steel and steel plate welding, reasonable force, dense surface designMGap uniform. The internal design hasSShaped flow channel, can be heated by cooling water and steam, after heat treatment, quenching and tempering, and hard chrome plating on the surface, there is a leak-proof device on the side. Leak-proof sealing strip for polymer resin fiber material wear-resistant, not easy to break. The replacement is convenient and quick, and does not affect the production schedule.
4. Unloading device
4.1 structure composition: the use of secondary enveloping turbine, worm structure or hydraulic overturning as the mixing chamber overturning unloading.
4.2 flip angle:110°(Maximum Flip Angle140°).
4.3 flip motor: Southern Electric Motor.
4.4 flip reducer: use Guomao pinwheel cycloid reducer.
4.5 flip control: two control protection system, will not flip action failure, resulting in damage to the machine.
5. Transmission mechanism
5.1 main motor:Wannan Electric Co., Ltd. production, protection levelIP54, is currently the highest level of protection, fully meet the needs of production.
5.2 gear box: gear with hard tooth surface involute reduction box, gear material 20CrMnTi, after quenching, carburizing, grinding teeth, hardness HRC57 ~ 62 gear box installed cooling circulation system, low noise, high transmission torque, can withstand higher load.
5.3 belt pulley group: the main motor and gear box drive belt pulley are finished, high insurance coefficient, to ensure the completion of the transmission requirements.
2.110L mixer technical parameters
Technology operation Reference Number |
Project |
Specifications |
Model |
X(S)N-110 |
|
Total mixing volume |
185Litres |
|
effective volume of mixing |
110 L |
|
Drive motor power |
160KW |
|
Turnover motor power |
5.5KW |
|
electric heater |
18KW |
|
Rotor speed (front/after) |
45/37.5r/min |
|
Flip angle |
140° |
|
Feeding mode |
rear projection |
|
Exterior dimensions (L×W×H) |
L4400mm×W2760mm×H3770mm |
|
Weight of whole machine |
15000KG |
Recommend Products
Online Message
We will contact you within one working day. Please pay attention to your email.
* Note: Please be sure to fill in the information accurately and keep the communication unblocked. We will get in touch with you as soon as possible.