Application: It is used for the plasticizing and mixing of rubber or plastics, as well as the vulcanizing agent added to the rubber after mixing.  
Structure: single output shaft (economic type of new bearing hard tooth surface reducer)
characteristic:
1. It has the functions of low failure rate, safety and reliability, emergency stop and reverse rotation. The reducer has low noise, small vibration and stable operation. On this basis, different configurations can be added according to customer requirements to achieve automatic production.  
2. The front and rear rollers are made of alloy chilled cast iron, and the working surface hardness is HS70 ± 2. Structure: hollow type. The roller is heated or cooled through the rotary joint on the end face. Flange type rotary joint and water inlet and outlet rubber hose are attached.
3. The base is welded with high-quality profile steel, and precision machining is carried out after tempering stress relief treatment.
4. Electrical control: major electrical components such as contactors and air switches shall be famous brands at home and abroad.
5. Safety device:
①.  Emergency brake (power off brake).
②.  4 mushroom emergency stop buttons, kick to stop the brake, front device
Technical parameters:
1. Working diameter of roller 450mm 18 "
2. Length of roller working face 1200mm 48 "
3. Roller distance adjustment~10 mm
4. Roller speed ratio 1:1.2727
5. Front roller working linear speed 24.19m/min (design linear speed)
6. Rear roller working linear speed 30.79m/min (design linear speed)
7. One time feeding amount 30-50 kg
8. Main motor: Y280M-6, 55KW, 980r/min
9. Model of reducer ZSY355-45-II
10. Roller support mode Bearing structure
11. Standard design grid voltage 380V
12. Standard design grid frequency 50HZ
13. Steam pressure 0.3Mpa
14. Cooling water pressure 0.3Mpa
15. Consumption 4.4~7 m3/h
16. Rubber baffle type Axial movable type
17. Overall dimensions of the machine (L x W x H) 5100X2000X1750mm
18. Total weight of the machine~12t
Product model